Beskrivelse
This red dot mount adapter fits your Vortex Spitfire HD GEN II 5X and will allow you to mount a Trijicon RMR red dot sight. Simply remove the plate on your HD Spitfire Gen II 5x and replace it with our mount in order to mount your Trijicon RMR or Holosun red-dot sight. You can take our mount off and replace the cover plate at any time. Red dot mounting hardware included.
Compatibility
- Vortex Spitfire HD GEN II 5X
Compatible red dot sights (list not exhaustive)
- Trijicon RMR/SRO
- Holosun HE407C / HE407C X2 / HE507C / HE507C X2 / HS407C / HS407C X2 / HS507C / HS507C X2
- Swampfox Kingslayer / Liberty / Justice
Specifications
- Material: 7075 Aluminum
- Coating: Matte Black Hardcoat
- Overall Length: 1.95"
- Overall Width: .99"
- Mounting Hardware: (2) 6-32 Flat Head Screws to mount the red dot to the plate
Installation
- Remove the cover plate
- Install the EGW sight mount and torque the mounting plate screws
- Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite to the provided mounting screws
- Torque red dot mounting screws to 15in/lbs
Evolution Gun Works (EGW)
