H&K VP9/VP9SK/P30/P30L/P30SK/HK45/HK45C/VP40 Dovetail Mount for Trijicon RMR, Holosun 407c/507c

Evolution Gun WorksSKU:198-49507
Ingen anmeldelser

Pris:
Salgspris 895,00

Avgift inkludert Frakt beregnet i kassen

Lagerbeholdning :
På lager

Beskrivelse

Dovetail red dot sight mount H&K VP9, VP9SK, P30, P30L, P30SK, HK45, HK45C, VP40. Compatible with red dot sights that features the Trijicon RMR/SRO footprint, such as Holosun 407c / 507c red dot sight.

Compatibility

  • H&K VP9
  • H&K VP9SK
  • H&K VP40
  • H&K P30
  • H&K P30L
  • H&K P30SK
  • H&K 45
  • H&K 45C

This mount is not intended for use with the optics ready version of these pistols.

This mount does not fit

  • HK USP
  • Any Optics Ready H&K Pistol

Specifications

  • Material: 7075 Aluminum
  • Coating: Matte Black Hardcoat
  • Overall Length: 1.604"
  • Overall Width: .99"
  • Mounting Hardware: (2) 6-32 Button Head Screws, (1) 6-32 X 3/16 Set Screw

Compatible red dot sight (tested; list not exhaustive):

  • Trijicon RMR
  • Trijicon SRO
  • Holosun HE407C
  • Holosun HE507C
  • Holosun HS407C
  • Holosun HS507C
  • Swampfox Kingslayer
  • Swampfox Liberty
  • Swampfox Justice

EGW red dot mounts are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.

Our red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.

The EGW HK VP9 Red Dot Mount is meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.

Installation instructions

  1. Remove the rear sight
  2. Install the EGW Sight Mount in the dovetail
  3. Tighten set screw (if applicable)
  4. Place the red dot sight on the EGW Sight Mount
    (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
  5. Apply blue Loctite to the provided mounting screws
  6. Torque mounting screws to 15in/lbs

 

Vi anbefaler også

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Produkter du nylig har sett på