Beskrivelse
Red dot sight mount for 1911s with Bomar cut dovetails. Compatible with Bomar-style dovetail mounts for red dot sights with the Docter/Noblex footprint, such as Vortex Venom/Viper, Burris Fastfire, Sightmark Mini Shot / Core Shot and many others. Mounting hardware is included.
Compatibility
- STI Edge (either this sight or LPA)
- Les Baer 1911 (adjustable rear sights)
- Colt Gold Cup Trophy with Bomar Rear Sight Cut
- Colt Gold Cup National Match .45acp
- Colt Gold Cup National Match 9mm
- Springfield TRP Operator
- Dan Wesson Bruin (may require fitting due to the Clark cut on the top of the slide)
Compatible red dot sights (list not exclusive)
- Vortex Viper
- Vortex Venom
- Burris FastFire 2/3/4
- Docter
- ADE RD3-001
- ADE RD3-002
- ADE RD3-009
- UTG Reflex Micro Dot
- Crimson Trace CTS-1200
- Crimson Trace CTS-1300
- Sightmark Mini Shot M-Spec
Specifications
- Material: 7075 Aluminum
- Coating: Matte Black Hardcoat
- Overall Length: 1.811"
- Overall Width: .99"
- Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 X 3/16 Set Screw
Installation
EGW red dot mounts are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.
Simply remove the rear sight on your gun and replace it with the adapter plate in order to mount your Vortex Viper/Venom, Burris FastFire, or Docter red-dot sight. You can take our mount off and replace your rear sight at any time.
- Remove the rear sight*
- Install the EGW Sight Mount in the dovetail
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount (Tip: A small piece of paper between the red dot sight and the mount will make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite #242 threadlocker to the provided mounting screws
- Torque mounting screws to 15in/lbs
Evolution Gun Works (EGW)
