Description
This mount fits the Sig Sauer P322 Optics Ready pistol and will allow you to mount a Trijicon RMR red dot sight. Simply remove the rear sight on your gun and replace it with our mount. You can take our mount off and replace your rear sight at any time. Mounting hardware included.
Compatibility
- Sig Sauer P322 Optics Ready
Compatible red dot sights (list not exhaustive)
- Trijicon RMR/SRO
- Holosun HE407C / HE407C X2 / HE507C / HE507C X2 / HS407C / HS407C X2 / HS507C / HS507C X2
- Swampfox Kingslayer / Liberty / Justice
Specifications
- Material: 7075 Aluminum
- Coating: Matte Black Hardcoat
- Overall Length: 1.780"
- Overall Width: 1.1"
- Mounting Hardware:
- (2) 6-32 Flat Head Screws - Requires use of 5/64" Hex Key
- (2) M3 x .5 x 8mm Flat Head Screws - Requires use of 2mm Hex Key
Installation
- Remove the rear sight plate
- Install the EGW Sight Mount on the slide
- Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs
Evolution Gun Works (EGW)
