Kimber 1911 Fixed Dovetail Mount for Trijicon RMR /SRO, Holosun 407c/507c

Dovetail red dot sight mount for Kimber 1911 Fixed handguns. Fits red dot sights with the Trijicon RMR footprint, such as Holosun 407c / 507c and many more. Mounting hardware is included.

Compatibility

• Kimber 1911's with Fixed Rear Sights
• Desert Eagle 1911G *
• Desert Eagle 1911C *

* This mount will require a decent amount of fitting to work with the Desert Eagles and is NOT a drop in part on that application.

This mount does NOT fit

• Kimber Micro
• Kimber Micro 9

Compatible red dot sights

• Trijicon RMR
• Trijicon SRO
• Holosun 407C
• Holosun 507C
• Holosun 507COMP
• Swampfox Kingslayer
• Swampfox Liberty
• Swampfox Justice

Specifications

• Material: 7075 Aluminum
• Coating: Matte Black Hardcoat
• Overall Length: 1.780"
• Overall Width: 1.1"
• Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 X 3/16 Set Screw

Installation

EGW red dot mounts are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.

Simply remove the rear sight on your gun and replace it with the adapter plate in order to mount your Vortex Viper/Venom, Burris FastFire, or Docter red-dot sight. You can take our mount off and replace your rear sight at any time.

• Remove the rear sight*
• Install the EGW Sight Mount in the dovetail
• Tighten set screw (if applicable)
• Place the red dot sight on the EGW Sight Mount (Tip: A small piece of paper between the red dot sight and the mount will make for easier removal and will keep Loctite off of the red dot sight.)
• Apply blue Loctite #242 threadlocker to the provided mounting screws
• Torque mounting screws to 15in/lbs