BC CZ Shadow 2 Optic Ready Plate - Multi Red Dot Scope Mount

Boss ComponentsSKU:103536
Ingen anmeldelser

Style: A Version
Salgspris 769 kr

Avgift inkludert Frakt beregnet i kassen

Lagerbeholdning :
På lager


With a wide variety of red dots covered, this mount for the CZ Shadow 2 optic-ready pistol allows for red dots such as Vortex Viper, C-More RTS2, and the Trijicon RMR to be mounted with ease. Replace the optic plate with the red dot multi-mount and install the red dot sight to the plate.


  • Precision machined from mild steel with a PVD-blackened protective finish
  • Serrations on both sides combined with rounded edges enhance grip and comfort when reloading
  • M3-0.5 X8 screws (Qty 2) included for installation of the plate to the frame.
  • M3-0.5 X12 Hex screws & washers are included for the installation of the Red Dot to the plate. Please note:  (These screws are only needed for those dots that sit over the M3 tapped holes, and may need shortening by cutting/filing for a perfect fitting. Firstly place the Red dot on the plate and thread the screws all the way through. Then flip over to see how much is sticking out. Mark the over-length for cutting as this needs to be ideally flush.  And finally, use either a Dremel/File.) 
  • Locator pins supplied
  • Please note screws to mount the red dot sight to the scope mount are omitted. Use the M4 screws supplied with the red dot. In the event screws are too long with either M4 (or) M3, it is possible to adjust to the desired length by cutting down the screws to suit. If you need help with this please contact us. 

This CZ Shadow 2 red dot scope mount replaces the stock plate included on the factory optic ready version and allows for a red dot to be installed. This red dot mount is not compatible with the dovetail version for this mount Click Here.

The optic ready red dot mount is installed to the frame using supplied M3x5 grub screws & the existing screws is compatible with the recommended screws provided with the red dot. 

A - Version - Compatible With: 

  • Burris FF 
  • Vortex Viper 
  • Vortex Venom
  • Sig Romeo 1 
  • EO Tech MRDS
  • JP Enterprises JPoint
  • Swapfox Sentinel 1x16
  • Vector Optics Frenzy-S 1x17x24 MIC

 B - Version - Compatible With: 

  • Trijicon RMR
  • Trijicon SRO
  • Holosun HS407C
  • Holosun HS507C
  • Holosun HS508T
  • Riton X3 Tactix PRD
  • NcStar VISM FilpDot Pro
  • Swampfox Kingslayer 
  • Swamfox Liberty RMR 1x22
  • Swapfox Justice RMR 1x27
  • Vector Optics Frenzy 1x22x26

C Version - Compatible With: 

  • C-More RTS
  • C-More RTS 2
  • C-More STS
  • C-More STS 2
  • Delta Optical MiniDot HD 24
  • Delta Optical MiniDot HD 26 
  • Delta Optical Stryker
  • Kahles Helia RD
  • Vortex Razor

Boss Components recommends 15-inch lbs of torque and a drip of blue Loctite on mounting screws. Use caution when installing screws, as over-tightening can damage the mount. Please note mounting screws are not included, use the screws supplied with the red dot. The use of a certified gunsmith is suggested to ensure proper installation.

Vi anbefaler også

Customer Reviews

Be the first to write a review

Produkter du nylig har sett på