Description
CAL (Cant And Loc) Atlas bipods are made for shooters who want a bipod without pan, so the bore stays perpendicular to the legs. It has five independent leg positions (including the patented 45° position), 63° of adjustable preloaded cant, and a wide footprint.
BT69 is the tall CAL model. It mounts directly to a Picatinny rail with a low-profile 2-screw clamp. The mount is semi-permanent, but saves weight, bulk, and cost compared with a QD lever mount.
The bipod is made from 6061-T6 aluminum (inner legs from 7075-T6), with Mil-Spec Type III hard coat anodize and heat-treated stainless steel components. Black only.
Adjustable, preloaded cant with an additional tension lever using the original KMW Pod-Loc®.
- Height: 6.1–12.3" (8.2" at 90°) / approx. 155–312 mm (208 mm)
- Preloaded cant: 63 degrees
- Position button: 0.5" / 12.7 mm diameter
- 5 leg positions: 0, 45, 90, 135 and 180 degrees
- Non-rotating legs: Outer leg does not rotate around the inner leg
- Larger, stronger inner legs
- Weight: 14.5 oz / approx. 411 g
- Footprint: 9.25–16.5" / approx. 235–419 mm
Using the KMW “Pod-Loc®”
With the CAL bipod mounted on the rifle, lock and unlock the canting motion by turning the Pod-Loc® lever. Clockwise to lock, counterclockwise to unlock. Reposition the lever by pulling it straight out from the body and rotating it to the desired position. Repeat until the lever sits where you want it.
Preload on the cant is adjusted by removing the Pod-Loc and tightening or loosening the exposed nut in 1/8–1/4 turn increments.
More information and accessories
- Picatinny mount with two 10-32 x 1.25" flat-head screws and clamp. Optional 10-32 x 1.25" socket cap screws sold separately.
- Recommended installation torque: up to 20 in-lb
- Independent, intentional, non-orientated leg positioning — either hand can move a leg into any of the five positions
- Solid leg positions allow the bipod to be loaded at 45° and 90°
- Non-orientated leg-length adjustment with either hand: outer leg slides on the inner leg and locks in any of five positions ¾" apart
- Hold What You Move Technology®
- Standard soft, durable rubber feet suitable for many surfaces
- Optional 3" BT22 leg extensions and adjustable leg extensions for extra height
- Optional interchangeable BT23 ski feet and BT74 Raider Cleat feet, swapped in the field by pressing a stainless-steel plunger
- Optional mounting systems for Accuracy International and Sako
Atlas
Atlas Bipods
