Description
The Adjustable Co-witnessing Red Dot Mount from Outer Impact allows the shooter to utilize a variety of red dot sights on any rifle with a picatinny rail, as well as allowing the shooter to dictate the height of optic or level of co-witness they prefer, from absolute to lower third and multiple points in between.
The Outer Impact Adjustable Co-Witnessing Red Dot Mount consists of 2 parts:
- Base Mount
- Top Plate (3 options available)
The Base Mount and Top Plates can be purchased separately, or in combination for a complete Adjustable Co-Witnessing Red Dot Mount.
Available Top Plates
| M.R.A. | Modular Red-Dot Adapter for "screw & pin" mounted red-dots with the Trijicon RMR, Docter/Noblex, Shield RMS or CMORE RTS/STS footprints. Covers over 31 confirmed compatible red-dots. |
| Aimpoint Micro | Adapter for red-dots using the Aimpoint Micro mounting standard. |
| MRO | Adapter for red-dots using the Trijicon MRO mounting standard. |
See Compatibility Chart at bottom of page for complete list of compatible red-dots.
Installation
This adjustable mount takes only a few of minutes to install on any Picatinny rail type and, once zeroed, you can freely adjust the level of the mount and no re-zeroing is required.
OuterImpact has gone to great lengths to assure that the fit and finish of this system are top-notch. The adapter system is precision-machined from 7075 aircraft aluminum and mounting hardware is included in the kit.
Compatibility Chart (list not exhaustive)
| M.R.A | Trijicon RMR/SRO Docter Insight MRDS Eotech MRDS Leupold Delta Point Leupold Delta Point Pro Vortex Razor Vortex Viper Vortex Venom Vortex Defender CCW Burris Fast Fire 2 & 3 & 4 CMORE RTS & STS Shield RMS (screws not included) Holosun 507 ”C”/407 ”C” V1 versions (screws not included) Holosun 507 ”C”/407 ”C” V2 and X2 versions (screws included) Holosun 508 ”T” UTG Reflex Micro Dot TruGlo Tru-Tec Sig Romeo 3, Romeo 3 Max, Romeo 3 XL Crimson Trace CTS-1250 & CTS-1550 Springfield Hex Dragonfly (must use OEM provided spacer) Bushnell RXS-100 and 250 Kahles Helia RD Creative XP Glass Eagle (screws not included) Noblex NV G SOUSA DARC Micro (screws not included) Sightmark – Mini Shot |
| Aimpoint Micro | Actus Core-1 1×20 Actus Core-2 1×20 Aimpoint CompM5 Aimpoint Duty RDS Aimpoint CompM5b Aimpoint Micro H-1 Aimpoint Micro H-2 Aimpoint Micro T-1 Aimpoint Micro T-2 Athlon Midas TSR2 Blaser RD 17 Burris Fastfire RD DI Optical SP1 Holosun 403 models Holosun 503 models Holosun 515 models Holosun 530 models Kahles Helia RD-C MAKdot S 1×20 Minox RV1 Primary Arms SLX Advanced Rotary Knob Primary Arms SLX MD-20 Sightmark Element Mini Solar Sightmark Wolverine 1×23 CSR Sightmark Wolverine 1×28 FSR Sig Sauer Romeo4 Sig Sauer Romeo5 Sig Sauer Romeo-MSR Swampfox Liberator 1×22 Vector Optics Centurion 1×20 Vector Optics Maverick 1×22 Vector Optics Maverick 1×22 Gen II Vector Optics Scrapper 1×22 Vector Optics Scrapper 1×25 Vortex Crossfire Vortex Sparc AR Vortex Sparc Solar ZeroTech Thrive |
| MRO | Trijicon MRO Trijicon MRO Patrol Burris RT-1X |
Mounting Hardware
- (1) M3 x 8mm Socket Head Cap Screws
- (2) 6-48 Weaver T-10 Torx Head Screws
- (2) Sight alignment pins
- (2) M3 x 8mm Flat Head Screws
- (2) M3 x 9mm Flat Head Screw
- (2) M3 x 6mm Torx Flat Head Screws
- (2) M3 x 6mm Socket Head Cap Screws
- (2) 6-40 Flat Head Screws – RMR
- (2) M4 X 10mm Rounded Head Screws
Required Installation Tools
- Torque Driver
- Extended shank T-10 Bit
Please follow mounting instructions included with the optic.
Material: Billet 7075-T6 aluminum
Finish: Black Anodize
Coating: Anodize
Dimensions, M.R.A. Top Plate: .600″ x 2.02″ x .1.06″
Dimensions, Aimpoint Micro Top Plate: .678″ x 1.98″ x .945″
Dimensions, MRO Top Plate: .660″ x 1.98″ x .755″
Additional Tools: T-10 Torx driver (not included)
OuterImpact
