Beskrivelse
Dovetail red dot sight mount for Kimber 1911 Fixed handguns. Fits red dot sights with the Trijicon RMR footprint, such as Holosun 407c / 507c and many more. Mounting hardware is included.
Compatibility
- Kimber 1911's with Fixed Rear Sights
- Desert Eagle 1911G *
- Desert Eagle 1911C *
* This mount will require a decent amount of fitting to work with the Desert Eagles and is NOT a drop in part on that application.
This mount does NOT fit
- Kimber Micro
- Kimber Micro 9
Compatible red dot sights
- Trijicon RMR
- Trijicon SRO
- Holosun 407C
- Holosun 507C
- Holosun 507COMP
- Swampfox Kingslayer
- Swampfox Liberty
- Swampfox Justice
Specifications
- Material: 7075 Aluminum
- Coating: Matte Black Hardcoat
- Overall Length: 1.780"
- Overall Width: 1.1"
- Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 X 3/16 Set Screw
Installation
EGW red dot mounts are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.
Simply remove the rear sight on your gun and replace it with the adapter plate in order to mount your Vortex Viper/Venom, Burris FastFire, or Docter red-dot sight. You can take our mount off and replace your rear sight at any time.
- Remove the rear sight*
- Install the EGW Sight Mount in the dovetail
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount (Tip: A small piece of paper between the red dot sight and the mount will make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite #242 threadlocker to the provided mounting screws
- Torque mounting screws to 15in/lbs
Evolution Gun Works (EGW)
