CZ Shadow 75/SP01 & Shadow 2 Dovetail Mount for Vortex Venom/Viper (Docter/Noblex)

Dovetail red dot sight mount mount for the CZ Shadow 2. Compatible with Docter/Noblex footprint red dot sights, such as the Vortex Venom/Viper, Burris FastFire, Leica Tempus, Sightmark Mini Shot M-Spec, UTG OP3 Micro and many more. Mounting hardware is included.

Compatibility

• CZ 75 Shadow
• CZ 75 SP01 Shadow
• CZ Shadow 2
• Dan Wesson DWX
• Dan Wesson DWX Compact

Does NOT fit

• Shadow 2 Optics Ready
• Shadow 2 Kadet

Specifications

• Material: 7075 Aluminum
• Coating: Matte Black Hardcoat
• Overall Length: 1.811"
• Overall Width: .99"
• Torque Specs: 15 in/lbs

Mounting Hardware (included)

• (2) 6-32 Button Head Screws
• (2) 6-32 Flat Head Screws
• (1) 6-32 Set Screw
• Note: The mounting screws require a 5/64" wrench and the set screws (when applicable) require a 1/16" wrench.

Compatible red dot sights (list is not exclusive)

• Vortex Viper
• Vortex Venom
• Burris FastFire 2/3/4
• Docter
• ADE RD3-001*
• ADE RD3-002*
• ADE RD3-009*
• UTG Reflex Micro Dot
• Crimson Trace CTS-1200
• Crimson Trace CTS-1300
• Sightmark Mini Shot
• Sightmark Core Shot

*All ADE sights require 6-32 x 3/8" screws.

Installation

EGW red dot mounts are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.

Simply remove the rear sight on your gun and replace it with the adapter plate in order to mount your Vortex Viper/Venom, Burris FastFire, or Docter red-dot sight. You can take our mount off and replace your rear sight at any time.

• Remove the rear sight*
• Install the EGW Sight Mount in the dovetail
• Tighten set screw (if applicable)
• Place the red dot sight on the EGW Sight Mount (Tip: A small piece of paper between the red dot sight and the mount will make for easier removal and will keep Loctite off of the red dot sight.)
• Apply blue Loctite #242 threadlocker to the provided mounting screws
• Torque mounting screws to 15in/lbs