{"product_id":"bt72-nc-super-cal-atlas®-bipod","title":"BT72-NC Super CAL Atlas® Bipod","description":"\u003cp dir=\"auto\"\u003e\u003cstrong\u003eSuper CAL\u003c\/strong\u003e is Atlas’s oversized Cant And Loc bipod, built for larger calibers and heavy rifles at long range. It is estimated about 50% larger than the CAL series, with the same five independent leg positions (including the patented 45° position), but \u003cstrong\u003ewithout pan\u003c\/strong\u003e, so the bore stays perpendicular to the legs. 63° of adjustable, preloaded cant and an extra-wide footprint.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eBT72-NC\u003c\/strong\u003e has no clamp. \u003cstrong\u003eNC\u003c\/strong\u003e means No Clamp — it requires a 17S-size mount or adapter to attach to a firearm. The interface uses a two-hole pattern of 1.100\" with 10-32 threads. It can also bolt directly to a \u003ca href=\"https:\/\/tactx.no\/products\/bt19-atlas-accuracy-international-spigot\" rel=\"noopener noreferrer nofollow\" target=\"_blank\"\u003eBT19 AI Spigot\u003c\/a\u003e or \u003ca href=\"https:\/\/tactx.no\/products\/bt70-atlas-m-lok%C2%AE-adapter\" rel=\"noopener noreferrer nofollow\" target=\"_blank\"\u003eBT70 M-LOK® adapter\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eThe bipod is made from 6061-T6 aluminum with Mil-Spec Type III hard coat anodize and heat-treated stainless steel components. Two 10-32 x 3\/8\" flat-head screws are included. Black only.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eAdjustable, preloaded cant with an additional tension lever using the original KMW Pod-Loc®.\u003c\/p\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003e\u003cstrong\u003eHeight:\u003c\/strong\u003e 5.6–10.8\" (7.4\" at 90°) \/ approx. 142–274 mm (188 mm)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePreloaded cant:\u003c\/strong\u003e 63 degrees\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePosition button:\u003c\/strong\u003e 0.5\" \/ 12.7 mm diameter\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e5 leg positions:\u003c\/strong\u003e 0, 45, 90, 135 and 180 degrees\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNon-rotating legs:\u003c\/strong\u003e Outer leg does not rotate around the inner leg\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 21.2 oz \/ approx. 601 g\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFootprint:\u003c\/strong\u003e 14.75–19.37\" \/ approx. 375–492 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 dir=\"auto\"\u003eUsing the KMW “Pod-Loc®”\u003c\/h4\u003e\n\u003cp dir=\"auto\"\u003eWith the Super CAL bipod mounted on the rifle, lock and unlock the canting motion by turning the Pod-Loc® lever. Clockwise to lock, counterclockwise to unlock. Reposition the lever by pulling it straight out from the body and rotating it to the desired position. Repeat until the lever sits where you want it.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003ePreload on the cant is adjusted by removing the Pod-Loc and tightening or loosening the exposed nut in 1\/8–1\/4 turn increments.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e The Area 419 ARCALOCK Dual Clamp is longer and prevents full 360° rotation of the Pod-Loc lever. Function is not affected, because the lever can be moved to a position that clears the clamp.\u003cbr\u003eNot compatible with the Magpul® QR Rail Grabber (MAG1196). Limited compatibility with the Really Right Stuff SC-ARC due to functional interference.\u003c\/p\u003e\n\u003ch4 dir=\"auto\"\u003eMore information and accessories\u003c\/h4\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003e\u003cstrong\u003eNC:\u003c\/strong\u003e No Clamp — requires a 17S-size mount or adapter with a 1.100\" two-hole pattern and 10-32 threads\u003c\/li\u003e\n\u003cli\u003eRecommended torque when installing a mount\/adapter: up to 30 in-lb\u003c\/li\u003e\n\u003cli\u003eIndependent, intentional, non-orientated leg positioning — either hand can move a leg into any of the five angle positions\u003c\/li\u003e\n\u003cli\u003eSolid leg positions allow the bipod to be loaded at 45° and 90°\u003c\/li\u003e\n\u003cli\u003eNon-orientated leg-length adjustment with either hand: outer leg slides on the inner leg and locks in positions ¾\" apart\u003c\/li\u003e\n\u003cli\u003eHold What You Move Technology®\u003c\/li\u003e\n\u003cli\u003eSuper CAL-size standard rubber feet (BT55), durable and suitable for many surfaces\u003c\/li\u003e\n\u003cli\u003eOptional interchangeable Super CAL ski feet (BT66) and Raider Cleat feet (BT75), swapped in the field by pressing a stainless-steel plunger\u003c\/li\u003e\n\u003cli\u003eOptional mounting systems for \u003ca href=\"https:\/\/tactx.no\/products\/bt19-atlas-accuracy-international-spigot\" rel=\"noopener noreferrer nofollow\" target=\"_blank\"\u003eAccuracy International\u003c\/a\u003e and \u003ca href=\"https:\/\/tactx.no\/products\/bt21-atlas-trg-bracket\" rel=\"noopener noreferrer nofollow\" target=\"_blank\"\u003eSako\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":50627398238401,"sku":"BT72-NC","price":5195.0,"currency_code":"NOK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/7272\/3137\/files\/BT72-NC-Stock-Images.webp?v=1789854260","url":"https:\/\/tactx.no\/en\/products\/bt72-nc-super-cal-atlas%c2%ae-bipod","provider":"TactX","version":"1.0","type":"link"}