{"product_id":"bt69-gen-2-cal-atlas®-bipod-tall-with-2-screw-clamp","title":"BT69 Gen. 2 CAL Atlas® Bipod: Tall with 2-Screw Clamp","description":"\u003cp dir=\"auto\"\u003e\u003cstrong\u003eCAL\u003c\/strong\u003e (Cant And Loc) Atlas bipods are made for shooters who want a bipod \u003cstrong\u003ewithout pan\u003c\/strong\u003e, so the bore stays perpendicular to the legs. It has five independent leg positions (including the patented 45° position), 63° of adjustable preloaded cant, and a wide footprint.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eBT69\u003c\/strong\u003e is the tall CAL model. It mounts directly to a Picatinny rail with a low-profile 2-screw clamp. The mount is semi-permanent, but saves weight, bulk, and cost compared with a QD lever mount.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eThe bipod is made from 6061-T6 aluminum (inner legs from 7075-T6), with Mil-Spec Type III hard coat anodize and heat-treated stainless steel components. Black only.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eAdjustable, preloaded cant with an additional tension lever using the original KMW Pod-Loc®.\u003c\/p\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003e\u003cstrong\u003eHeight:\u003c\/strong\u003e 6.1–12.3\" (8.2\" at 90°) \/ approx. 155–312 mm (208 mm)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePreloaded cant:\u003c\/strong\u003e 63 degrees\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePosition button:\u003c\/strong\u003e 0.5\" \/ 12.7 mm diameter\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e5 leg positions:\u003c\/strong\u003e 0, 45, 90, 135 and 180 degrees\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNon-rotating legs:\u003c\/strong\u003e Outer leg does not rotate around the inner leg\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLarger, stronger inner legs\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 14.5 oz \/ approx. 411 g\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFootprint:\u003c\/strong\u003e 9.25–16.5\" \/ approx. 235–419 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 dir=\"auto\"\u003eUsing the KMW “Pod-Loc®”\u003c\/h4\u003e\n\u003cp dir=\"auto\"\u003eWith the CAL bipod mounted on the rifle, lock and unlock the canting motion by turning the Pod-Loc® lever. Clockwise to lock, counterclockwise to unlock. Reposition the lever by pulling it straight out from the body and rotating it to the desired position. Repeat until the lever sits where you want it.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003ePreload on the cant is adjusted by removing the Pod-Loc and tightening or loosening the exposed nut in 1\/8–1\/4 turn increments.\u003c\/p\u003e\n\u003ch4 dir=\"auto\"\u003eMore information and accessories\u003c\/h4\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003ePicatinny mount with two 10-32 x 1.25\" flat-head screws and clamp. Optional 10-32 x 1.25\" socket cap screws sold separately.\u003c\/li\u003e\n\u003cli\u003eRecommended installation torque: up to 20 in-lb\u003c\/li\u003e\n\u003cli\u003eIndependent, intentional, non-orientated leg positioning — either hand can move a leg into any of the five positions\u003c\/li\u003e\n\u003cli\u003eSolid leg positions allow the bipod to be loaded at 45° and 90°\u003c\/li\u003e\n\u003cli\u003eNon-orientated leg-length adjustment with either hand: outer leg slides on the inner leg and locks in any of five positions ¾\" apart\u003c\/li\u003e\n\u003cli\u003eHold What You Move Technology®\u003c\/li\u003e\n\u003cli\u003eStandard soft, durable rubber feet suitable for many surfaces\u003c\/li\u003e\n\u003cli\u003eOptional 3\" \u003ca href=\"https:\/\/tactx.no\/products\/bt22-atlas-ben-forlengere\" rel=\"noopener noreferrer nofollow\" target=\"_blank\"\u003eBT22 leg extensions\u003c\/a\u003e and adjustable leg extensions for extra height\u003c\/li\u003e\n\u003cli\u003eOptional interchangeable \u003ca href=\"https:\/\/tactx.no\/products\/bt23-atlas-ski-feet\" rel=\"noopener noreferrer nofollow\" target=\"_blank\"\u003eBT23 ski feet\u003c\/a\u003e and \u003ca href=\"https:\/\/tactx.no\/products\/bt74-atlas-raider-cleat-feet\" rel=\"noopener noreferrer nofollow\" target=\"_blank\"\u003eBT74 Raider Cleat feet\u003c\/a\u003e, swapped in the field by pressing a stainless-steel plunger\u003c\/li\u003e\n\u003cli\u003eOptional mounting systems for \u003ca href=\"https:\/\/tactx.no\/products\/bt19-atlas-accuracy-international-spigot\" rel=\"noopener noreferrer nofollow\" target=\"_blank\"\u003eAccuracy International\u003c\/a\u003e and \u003ca href=\"https:\/\/tactx.no\/products\/bt21-atlas-trg-bracket\" rel=\"noopener noreferrer nofollow\" target=\"_blank\"\u003eSako\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Atlas","offers":[{"title":"Default Title","offer_id":50627380904129,"sku":"BT69","price":3196.0,"currency_code":"NOK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0534\/7272\/3137\/files\/BT69-Stock-Images.webp?v=1789853605","url":"https:\/\/tactx.no\/en-eu\/products\/bt69-gen-2-cal-atlas%c2%ae-bipod-tall-with-2-screw-clamp","provider":"TactX","version":"1.0","type":"link"}