H&K USP Dovetail Sight Mount For DeltaPoint Pro / Shield RMS

H&K USP dovetail sight mount for DeltaPoint Pro / Shield RMS red dot sights. Mounting hardware is included.

Compatibility

• HK USP Tactical 9mm
• HK USP Tactical .45 ACP
• HK USP 9mm
• HK USP 40 S&W
• HK USP .45 ACP

Does NOT fit

• USP Compact (rear sight cut depth is .200" instead of .160")
• USP Expert
• USP Elite
• VP9
• VP40
• P30
• P30L
• P30SK
• HK45
• HK45C

Specifications

Material: 7075 Aluminum
Coating: Matte Black Hardcoat
Overall Length: 1.604"
Overall Width: .99"
Overall Height: .335"
Mounting Hardware: (2) 6-32 Button Head Screws, (1) 6-32 X 3/16 Set Screw

Red Dot Fitment

• Vortex Defender-CCW 3 MOA Red Dot Sight
• Vortex Defender-CCW 6 MOA Red Dot Sight
• Bushnell RXS-100 Requires 6-32 x 3/8" SHCS
• Bushnell RXC-200 Requires 6-32 x 3/8" SHCS
• Bushnell RXU-200 Requires 6-32 x 3/8" Flat Head Screws
• Bushnell RXS-250 Requires 6-32 x 3/8" SHCS
• Crimson Trace CTS-1500
• Holosun 407K*
• Holosun 507K*
• Holosun EPS-GR*
• Holosun EPS-RD*
• Holosun EPS-Carry-GR*
• Holosun EPS-Carry-RD*
• Jpoint
• Leupold Delta Point Pro
• Optima
• Redfield Accelerator
• Shield RMS
• Shield RMSc
• Shield SMS
• Sig Romeo Zero

(*with Modification, the rear two locater pins on the plate must be filed off in order to allow the 407K/507K/EPS Models to fit.)

Installation Instructions

Our red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.

• Remove the rear sight*
• Install the EGW Sight Mount in the dovetail
• Tighten set screw (if applicable)
• Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
• Apply blue Loctite to the provided mounting screws
• Torque mounting screws to 15in/lbs

* Modification of your firearm may nullify the manufacturer's warranty.

This product should be installed and checked by a qualified gunsmith.

No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.